Materials &
project math.

Estimate the cubic yards, bags, and cost of concrete for slabs, footings, columns, and walls. Includes a 10% waste factor and side-by-side comparison of ready-mix versus bag pricing.

Estimate the concrete volume, rebar grid layout, bar count, weight, and total cost for a reinforced concrete slab. Includes a 10% waste factor for concrete.

Estimate the cubic yards and bags of mulch needed for your landscaping project. Compare bulk delivery versus bagged pricing with a 10% waste factor.

Estimate the tons of hot-mix asphalt needed for your paving project. Uses standard density of 145 lb/ft³ with a 10% waste factor.

Calculate the board footage of lumber for your woodworking or construction project. Enter dimensions and quantity to estimate volume and cost.

Estimate the square footage, number of boxes, and cost of flooring for any room. Includes a configurable waste factor for cuts and fitting.

Estimate the cubic yards and tons of gravel needed for your project. Converts volume to weight using standard gravel density with a 10% waste factor.

Estimate material, labor, and total cost for your new deck. Compare pressure-treated, cedar, and composite decking with optional railing.

Estimate the number of posts, panels, and total cost for your fence project. Compare wood, vinyl, chain-link, and aluminum options with gate pricing.

Estimate the gallons of paint needed for your room. Deducts door and window openings and accounts for multiple coats at 400 sq ft per gallon coverage.

Estimate the number of drywall sheets, joint compound, tape, and screws needed for your project. Covers walls and ceiling with full supply list and cost.

Estimate the rolls, bags, or kits of insulation needed for your project. Compare batt, blown-in, and spray foam options across R-values with cost estimates.

Estimate the number of tiles, bags of grout, and total cost for your tiling project. Includes grout line allowance and a 15% waste factor for cuts and breakage.

Calculate the number of steps, rise and run per step, stringer length, and IRC code compliance for your staircase. Enter total rise and preferred tread depth.

Estimate the roofing squares, shingle bundles, and total cost for your roof replacement. Adjusts for roof pitch and compares asphalt, metal, tile, and slate options.

Estimate the number of rebar bars, total linear feet, weight, and cost for a reinforced concrete slab. Supports #3 through #8 bar sizes at any spacing.

Estimate the linear feet of gutters, number of downspouts, and total cost for your home. Compare aluminum, vinyl, steel, and copper with material and labor breakdowns.

Estimate the number of pavers, tons of base gravel, bedding sand, and total cost for your paving project. Includes a 10% waste factor for cuts and breakage.